“The best 3-in-1 reflective foil insulation solution”
Combines the 3 in 1 benefits of:
– It is a Thermal Barrier.
– It offers optimal thermal insulation.
– Offers an average temperature drop of about 7°C when effectively installed.
Offers an average temperature drop of about 7°C when effectively installed.
Between 5°C to 8°C temperature drop is easily achieved
A reduction of 30% – 40% of energy cost where Air Conditioning units are in use.
Yes. It reduces contact noise (e.g. rain noise) by about 19dbs.
It does not collapse with time; it maintains its structure/form over time.
It reflects the solar radiant heat and blocks heat transfer through conduction and convection.
It seals around nails once pierced through.
It is laid on the purlins and given a small sag.
Jumbolene® Roof Insulation is available in 3 different thicknesses depending on your application. The different sizes are 2mm, 5mm and 10mm.
It is long lasting and lasts at least forty years.
Jumbolene® Roof Insulation does not delaminate or peel off with time.
Yes it can. The insulation is laid below the purlins and supported by galvanised GI wire strainer wires or galvanised mild steel plates. An overlap of about 100mm is recommended while installing.
This depends on the height of the roof from the floor and the operational temperature of the area to be insulated. In addition, the insulation effect increases with the thickness of the product.
Product quality, service and technical back-up ensure that Jumbolene® remains one of the brand leaders in the insulation field. We maintain strict protocol that ensures that all products manufactured meet the laid down specifications for each grade. In addition, Jumbolene® carries the KEBS standard mark of quality ensuring that it maintains the high standards set out for the products.